9803444025we repair all brands of washing machine in kathamandu:kalanki , satungle, Balkhu, gunjudhara , naikap, swambhu, teku, tripureshor, thapathali, Bagbazar, kamaladi, kamalpokhari , naxal, dillibazar maitighar , maitidevi , rato pul, gausala, chabahil , kapan, aakashepul, sukedhara, samakhushi, gangabu,balaju, banasthali etc we have also have service with reasonable price..

Washer: Why won’t my washing machine drain?

After the wash cycle ends and before the spin cycle starts, the water should drain from the washer. If water remains, first check for a kink or clog in the drain hose, a backup in the house drain system or in a drain hose lower than the water level in the drain tub. If the drain path is clear, the drain pump might have failed or the water-level pressure switch might not sense how much water is in the washer.

In a top-load washer, a failed lid switch can keep the washer from advancing to the drain and spin cycle. A failed timer or problem with the drive motor can also prevent a top-load washer from draining and spinning. On a front-load washer, a bad main electronic control board or failed motor control board can prevent the washer from draining and spinning.

Many washers won’t spin if they’re not level, so performing preventive maintenance checks that include leveling the washer may help you get your washer draining and spinning.

If you have a top-load washer, this video has additional troubleshooting tips to get your washer draining and spinning again.

Cleaning a clogged drain pump filter on on a front-load washer without a drain pump access door often gets the machine draining and spinning again.

These repairs may help solve your washer problem

Washer common questions

Repair or replace the washer drain pump

The drain pump removes water from the washer at the appropriate times during the wash cycle. The pump’s bearing can seize, the seal can fail or the impeller blades can break. The belt on a belt-driven pumps can break, and the pulley can shear off. A humming noise when the washer is full of water is a common symptom of a failing pump. In some cases, you can repair the pump by clearing it of debris, fixing wiring failures or replacing a seal. If the pump can’t be repaired or rebuilt, replace it.